Monday, May 31, 2010

Type II Crown


The Type II Crown is sanded and cleaned before the silver soldering process. The making of the Type II Crowns is possibly a story for another time, right now it's time to build bikes! Thanks for all the e-mails and interest in the manufacturing of the forks!
Posted by Picasa

Parts , Ready To Go !


Shown is the length and angle fixture for the Type II parts for the pinning alignment process.
Posted by Picasa

Alignment Tool


This tool aligns the crown for the proper angle and proper length just before the alignment hole is drilled. It is designed to do both legs of the fork.
Posted by Picasa

Checking the Fit


It is important to check the fit before the final flux and silver soldering.
Posted by Picasa

Just Before Silver


This photo shows the fit, and the alignment hole that is pinned with a small diameter piece of brass rod just after applying the flux.
Posted by Picasa

Silver Soldering Complete


This is what the crown and fork leg look like after silver brazing and before cleaning the flux off. More to come with completed forks!
Posted by Picasa

Wednesday, May 26, 2010

Another Nostalgic Request


Some friends requested some more old racing photos, here goes. Sure loved those "cushion" short tracks, my favorite. Thanks . (click on photo)
Posted by Picasa

Monday, May 24, 2010

Titanium Update !


I am still amazed at how many titanium frames I get from all over the world for restoring, and updating to new disc brake mounts. Shown are two of my older bikes that were in for refinishing, and one was going from canti studs to the classic Roller Cam brake set up. The Merlin came in from the UK for a new disc set up and new drive train cable mounts. It's a lot of fun getting them back into shape!
Posted by Picasa

29er Type II Forks!


I want to share with my customers some of the processes of building their frames. I have missed taking some process photos because I have only two hands , but hopefully these photos will help understand the building process. These next photos will be the building of 29er , disc mount , Type II Forks. This part of the blog is dedicated to a few of my customers who want to follow the process of the build. All of them live pretty far away, Colorado, Canada, and Spain. Thanks Jesse, Richard and Antonio. I hope to show some finished Type II Forks in my blog in the next few days that are going to Europe this week.
Posted by Picasa

Machined Type II Fork Parts


These are the parts after machining that will make up the drop out section of the Type II Fork.
Posted by Picasa

Tacking Fixture


This is the blade to drop out fixture for proper alignment for tig tacking the parts together . This is just one of the many fixtures I have made, it seems you need a fixture for every process you do in the building of a bike frame and fork. I literally have all of my drawers and cabinets filled with fixtures. That is why most bike builders gulp when someone asks the question " do you have a frame fixture?" We wish it were that easy, but figuring out the fixtures and building them is part of the fun of being able to build a straight reliable frame, fork or any part for that matter.
Posted by Picasa

Drop Outs


The drop outs have been tacked in place and are ready to be fluxed and brazed. End caps are shown also.
Posted by Picasa

" Fluxed" and Ready To Braze


The fork parts have been fluxed and are ready to braze. The flux helps protect the surface of the metal from forming oxides on the metal during heating and also helps as a wetting agent, ( it helps the brass flow easily during the process). Since these forks are going to have disc mounts, I use a heavier cap for the disc side to help with the additional loads from the disc mount.
Posted by Picasa

Just Brazed


After the drop out is tig tacked to the fork leg, the drop out is first brazed to the fork leg, and while still hot, I set the half round cap end on and finish the final brazing all in one process. I was hoping to have some brazing photos, but Cowboy ( our family dog) has not learned how to work my camera yet, but were working on that .
Posted by Picasa

Drop Out Detail


You can see all but one of the end caps have been trimmed down by hand snips to get rid of the extra metal before being turned in the lathe.
Posted by Picasa

End Caps After "Lathe Cleanup"


The extra metal was machined off just before the final hand finishing in my lathe.
Posted by Picasa

The " Almost Finished Type II Blade"


Just a few more details before the blade is finished into a complete fork, stay tuned!
Posted by Picasa